PDF Downloads
You need to have Acrobat Reader installed on your computer to access our PDF downloads. If you do not have it installed already, you can download and install it free of charge from the Adobe website. Please allow plenty of time for documents to download as some may be slower than others if you are using a dial-up connection.
Handbook and Subscription Service
Handbook order form
Handbook subscription order form
Changes in third edition - April 2007
Changes to third edition - August 2007
Changes to third edition - November 2007
Changes to third edition - March 2008
Changes to third edition - August 2008
Plot Registration
Plot Registration Application Form
Amendment/Cancellation Form
Specimen Compliance Certificate
Specimen Purchase Statement
New Robust Details
Protocol
RDL Annual Reviews
Annual review - 2006/7
Annual review - 2005/6
Annual review - 2004/5
Checklists - Separating Walls/Masonry
E-WM-1 - MASONRY - Dense aggregate blockwork - (wet plaster)
E-WM-2 - MASONRY - Lightweight aggregate blockwork - (wet plaster)
E-WM-3 - MASONRY - Dense aggregate blockwork - (render and gypsum-based board)
E-WM-4 - MASONRY - Lightweight aggregate blockwork - (render and gypsum-based board)
E-WM-5 - MASONRY - Besblock 'Star Performer' cellular blockwork (render and gypsum-based board)
E-WM-6 - MASONRY - Aircrete blockwork - (render and gypsum-based board)
E-WM-8 - MASONRY - Lightweight aggregate blockwork - Saint-Gobain Isover RD35 (gypsum-based board)
E-WM-9 - MASONRY - Solid dense aggregate blockwork (render and gypsum-based board)
E-WM-10 - MASONRY - Thin-joint aircrete blockwork - (render and gypsum-based board)
E-WM-11 - MASONRY - Lightweight aggregate blockwork - (render and gypsum-based board) with 100mm (min) cavity
E-WM-12 - MASONRY - Plasmor "Aglite Ultima” lightweight aggregate blockwork - (render and gypsum-based board)
E-WM-13 - MASONRY - Untied thin-joint aircrete blockwork - (render and gypsum-based board)
E-WM-14 - MASONRY - Lightweight aggregate blockwork - Saint-Gobain Isover RD35 (gypsum-based board) with 100mm (min) cavity
Checklist - Separating Walls/Timber
E-WT-1 - TIMBER - Timber frame cavity wall without sheathing board
E-WT-2 - TIMBER - Timber frame cavity wall with sheathing board
Checklist - Separating Walls/Steel
E-WS-1 - Steel - Twin metal frames
E-WS-2 - STEEL - British Gypsum GypWall QUIET IWL
E-WS-3 - STEEL - Modular steel frame housing
E-WS-4 - Steel - Twin metal frames (min. 250mm between linings)
Checklist - Separating Floors/Concrete
E-FC-1 - CONCRETE - Precast concrete plank with screed and floating floor treatment
E-FC-2 - CONCRETE - In-situ concrete slab and floating floor treatment
E-FC-4 - CONCRETE - Precast concrete plank with screed laid on IsoRubber resilient layer
E-FC-5 - CONCRETE - Precast concrete plank and Cellecta Yelofon HD10+ system and floating screed
E-FC-6 - CONCRETE - Beam and block with concrete topping Regupol E48 system and floating screed
E-FC-7 - CONCRETE - Beam and block with concrete topping and floating floor treatment
E-FC-9 - CONCRETE - precast concrete plank with directly applied screed and Thermal Economics IsoRubber top bonded resilient floor covering
E-FC-10 - CONCRETE - in-situ concrete slab with Thermal Economics IsoRubber top bonded resilient floor covering
Checklist - Separating Floors/Timber
E-FT-1 - TIMBER - I joists
E-FT-2 - Timber - solid joists
E-FT-3 - TIMBER - metal web joists
E-FT-4 - TIMBER - Finnforest SoundBar timber joist floor with screed finish
Checklist - Separating Floors/Steel-concrete composite
E-FS-1 - Steel-concrete composite
E-FS-2 - STEEL - UltraBEAM metal joists and floating floor treatment
