Checklists
Below are the checklists relating to the various Robust Details. They can also be found on the specific RD page by Selecting your Robust Detail.
Checklists - Separating Walls/Masonry
E-WM-11 - MASONRY - Lightweight aggregate blockwork – (render and gypsum-based board) with 100mm (min) cavity
E-WM-12 - MASONRY - Plasmor "Aglite Ultima” lightweight aggregate blockwork - (render and gypsum-based board)
E-WM-14 - MASONRY - Lightweight aggregate blockwork - Saint-Gobain Isover RD35 (gypsum-based board) with 100mm (min) cavity
E-WM-16 - SEPARATING WALL - CAVITY MASONRY - Dense aggregate blockwork - (render and gypsum-based board) - with 100mm (min) cavity
E-WM-17 - MASONRY - lightweight aggregate blockwork Saint-Gobain Isover RD Party Wall Roll or Round the House Roll (gypsum-based board)
E-WM-18 - SEPARATING WALL - CAVITY MASONRY - Dense aggregate blockwork - (wet plaster) with 100mm (min) cavity
E-WM-19 - MASONRY – Dense or lightweight aggregate blockwork (render and gypsum-based board) with 100mm minimum cavity and MONARFLOOR® BRIDGESTOP® system
E-WM-20 - MASONRY - lightweight aggregate blockwork Saint-Gobain Isover RD Party Wall Roll or Round the House Roll (gypsum-based board) with 100mm minimum cavity
Checklists - Separating Walls/Timber
Checklists - Separating Walls/Steel
Checklists - Separating Floors/Concrete
E-FC-6 - CONCRETE - Beam and block with concrete topping Regupol E48 system and floating screed (CM)
E-FC-9 - CONCRETE - precast concrete plank with directly applied screed and Thermal Economics IsoRubber top bonded resilient floor covering
E-FC-10 - CONCRETE - in-situ concrete slab with Thermal Economics IsoRubber top bonded resilient floor covering
E-FC-11 - SEPARATING FLOOR - CONCRETE - Precast concrete plank with screed laid on Icopal-MONARFLOOR® TRANQUILT® resilient layer
E-FC-12 - SEPARATING FLOOR - CONCRETE - Precast concrete plank and Thermal Economics IsoRubber Base HP3 system and floating screed

